Jindal Solvent Cements fuses the materials, resulting in a single piece of thermoplastic that is uniformly bonded. It is a quick, simple, and incredibly dependable joining method.
It assures unmatched superiority, backed by extensive R&D efforts. We have CPVC Solvent Cements, uPVC ASTM Solvent Cement, and Regular Solvent Cements for Rigid PVC Pipes and Fittings.
Storage & Handling
- Store at temperatures between 10°C and 50°C
- When in use, keep the container closed.
- Heat, sparks, open flames, and children should all be avoided.
- Store in a cool, dry, well-ventilated place.
- Do not mix with any other solvent.
Directions for Use
The Following points should be clearly understood to make consistently good joints.
- Stir and Shake before using.
- Clean pipe and fittings with cleaner.
- The joining surfaces must be softened and made semi-fluids.
- Apply a generous layer of solvent cement to the pipe and fittings. Overcoating a thin wall or bell end pipe is not recommended.
- Assemble parts QUICKLY! The cement must be fluid. If not fluid, re-coat both parts.
- The pipe should be pushed firmly into the fitting using a 1/4 turning motion until the pipe bottoms out.
- For 60 seconds, hold the pipe and fittings together.
- Allow the joint to cure sufficiently before handling.
- Do not apply pressure until the cement has completely cured.
